Haivision Makito X Quick Start Guide

www.haivision.com
Makito X Decoder
Makito X Decoder Quick Start Guide
1
Generated on:2024-03-20 15:11:56
HVS-ID-QSG-MAKX-DEC-252
•
•
•
•
•
•
•
Makito X Decoder Quick Start Guide
Makito X Decoder v2.5.2
This Quick Start Guide summarizesthe stepsrequired to install and configure the Makito X
decoder(single-heightor dual-heightchassis) to set up video decoding from a Haivision encoder (Makito
X, Makito X4*, Makito “Classic”, or Hai1000/Piranha) or a third party compatible encoder.
For detailed configuration and operation information, please refer to the User's Guide (available at
https://doc.haivision.com) . For the default credentials, refer to the Important Notice document (postcard
shipped with the appliance or available on the Haivision Support Portal at http://support.haivision.com).
For information on the MB6 (6-slot) or MB21 (21-slot) chassis,refer to theMB6 Chassis Installation Guide
or MB21 Chassis Installation Guide.
Guide Contents
Installing the Decoder
Accessing the Web Interface
Setting Up Decoder Streams
Configuring SDI Decoder Output
Configuring the Decoder HDMI Display
Configuring Analog Audio Output
Starting to Decode
Note
*The Makito X decoder may be used with the Makito X4 encoder for 1080p or lesser resolutions.


Haivision Makito X Specifications

General

Video Encoding	H.264/AVC, H.265/HEVC
Audio Encoding	MPEG-1 Layer II
Input Interfaces	HDMI, SDI
Output Interfaces	IP
Latency	Less than 100 ms
Resolution Support	Up to 4K
Network Protocols	RTP, UDP, TCP, SRT, RTSP, RTMP
Operating Temperature	0 to 40°C