Need help?Do you have a question about the Haivision Makito and is the answer not in the manual?
General| Video Inputs | HDMI |
|---|---|
| Video Outputs | SDI, HDMI |
| Video Encoding | H.264/AVC |
| Audio Encoding | MPEG-1 Layer II |
| Protocols | RTSP, SRT |
| Power | 12V DC |
| Operating Temperature | 0°C |
| Latency | Ultra-low latency (specific value depends on configuration) |
| Weight | 0.45 kg (1 lb) |
Details precautions to prevent damage from electrostatic discharge to components.
Explains the process of securing networked devices to prevent abuse.
Provides instructions on choosing a suitable location and setting up the encoder.
Details how to connect the encoder to the network and a computer via Ethernet or serial.
Explains how to connect DVI-I and BNC/S-Video interfaces for A/V sources.
Describes the procedure for powering up the Makito encoder.
Explains how to perform a Power Reset or Factory Reset on the Makito encoder.
Details how to access the encoder via Web interface or CLI.
Provides steps to log in to the Makito configuration Web page.
Explains how to define video encoding properties like input type, resolution, and bitrate.
Describes how to configure audio encoding properties like input connector and bitrate.
Details how to capture KLV or CoT metadata and incorporate it into the MPEG stream.
To Next Page
