When moving the machine, make sure
that the moving and lifting capacity of
your tractor or forklift is sufficient for the
weight of the machine. Only lift the ma-
chine by the indicated lifting points
(Figure 8) or with the lifting equipment of
the tractor.
When connecting the machine to the tractor's lifting equipment, the tractor cabin must be free of people in order
to prevent any accidental contact with the controls. Check all the connecting devices of the tractor and the fire-
wood processor before connecting them. Never use faulty equipment. The pins that are used to connect the
pushbars and drawbars to the machine must be of the correct size, and the appropriate locking pins must be used
to secure them.
The machine must be placed in the transport position whenever it is moved. Exercise extreme caution when mov-
ing the machine in the operating position. Always lower the machine to the ground when you stop.
Note! Incorrect lifting may cause a hazardous situation or damage the machine.
To Next Page
Loading...
Need help?
General