Hakko Electronics FT-802 - Packing List and Part Names; Specifications

1
1. PACKING LIST AND PART NAMES
Please make sure that all items listed below are included in the package.
PACKING LIST
HAKKO FT-802 station ...................................1
HAKKO FT-8004.............................................1
Power cord .....................................................1
Wire material indicator seal ...........................1
Hexagon wrench (1.27mm) ............................1
Instruction Manual ..........................................1
Hexagon socket set screw (M2.5x2.5) ...........2
Handle
HAKKO
FT-802 station
HAKKO FT-8004
Blade (not included)
Power cord
Hexagon wrench
Power switch
Receptacle
Plug
Hexagon socket set screw (2)
Handle holder
Instruction Manual
Lead adjuster
THERMAL WIRE STRIPPER
FT-802
Power receptacle
Blade removal plate
Wire material
indicator seal
2. SPECIFICATIONS
Power Consumption 76W
• HAKKO FT-802
Power Consumption
Length of Cord
Length (w/o cord, blade)
Weight (w/o cord,blade)
72W (20V)
1.6m (5.3ft.)
153mm (6.0in.)
47g (0.10lb.)
• HAKKO FT-8004 (Handle)
Output
Outside dimensions
Weight
AC 20V
76(W)×159 (H)×161 (D)mm
(3.0×6.3×6.3in.)
1.6kg (3.5lb.)
• Station
NOTE:
*Specications and design are subject to change without notice.
*This product is protected against electrostatic discharge.
CAUTION
This product includes features such as electrically conductive plastic parts and grounding of the
handle and station as measures to protect the device to be soldered from the effects of static
electricity.
Be sure to observe the following instructions:
⿟
The handle and other plastic parts are not insulators, they are conductors. When replacing parts or
repairing, take sufcient care not to expose live electrical parts or damage insulation materials.
⿟
Be sure to ground the unit during use.