Folie 3
Contents
6 Particular settings according to the customer’s requirements (last error display
and water stage selection, cleaning agent dosing, SWR, side brush, filter) 31
6.1 Display of last error 34
6.2 Water stage when start cleaning 35
6.3 Cleaning agent when turning water ON 36
6.4 Switchover to SWR when water ON 37
6.5 Side brush when turning “scrubbing“ ON 38
6.6 Shake filter 39
6.7 Filter vacuuming when turning sweeping ON 40
6.8 Automatic filter shaking when sweeping is terminated 41
7 Module Settings 42
7.1 Module 1 43
7.2 Module 3 44
8 Control panel settings 45
9 Water pump 46
10 Diagnosis LED for travel drive module 47
10.1 Signal measuring at the drive control 50
11 Error reference chart with information on service display 54
To Next Page