EasyManuals Logo

HAKO Scrubmaster B120 R Operation

HAKO Scrubmaster B120 R
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Hako Scrubmaster B120 R
Qualified persons only are authorised to operate the machine!
The machine is not designed for coarse material! Floor area sweeping before!
Use only cleaning agents suitable for automatic machines! (low foaming!)
Please pay attention to the informations in the instruction manual!
9
10
5
4
3
2
1
6
OPERATION
1. Disconnect mains plug of the charger and put it in front of the seat 1.
2. Open soiled water tank lid 2 and lock the lids latch 3. Fill the clear water
tank from opening 4. Control the filling level by the filling level indication 5.
(Located next to suction hose)
3. Switch the machine on by the key switch 6. Actuate drive direction from
button 7.
4. Press green button 8 to lower brush head 9 and squeegee 10, suction
turbine switches on.
5. Press pedal 11, machine moves and brush head drive switches on. Use
button 12 to adjust the water (if necessary)
NOTE! Make sure that pads / brushes are installed!!!
7
11
12
8

Other manuals for HAKO Scrubmaster B120 R

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HAKO Scrubmaster B120 R and is the answer not in the manual?

HAKO Scrubmaster B120 R Specifications

General IconGeneral
BrandHAKO
ModelScrubmaster B120 R
CategoryScrubber
LanguageEnglish

Related product manuals