Why Hal Technology HAL-HPC301 printer does not print?
If your Hal Technology Cash Counter's printer isn't printing, verify that the printer is on, contains thermal paper, and is functioning correctly. Also, make sure Bluetooth is enabled on the HPC301. You can test the connection by running a connection test from the Bluetooth Settings Page.
How to save changes in the Settings Page of Hal Technology HAL-HPC301 Cash Counter?
If the Hal Technology Cash Counter unit isn't saving changes on the Settings Page, remember to exit the Settings Page after making adjustments. Settings are saved when you leave the page. If the unit is turned off before exiting, any unsaved changes will be lost.
What to do if Hal Technology HAL-HPC301 Cash Counter will not turn on?
If your Hal Technology Cash Counter won't turn on: * Hold the Power Button down until the unit turns on. * Plug the unit in using the supplied power adapter or charger, wait a few minutes, and try turning it on.
Why does Hal Technology Cash Counter pump sound like it is working hard?
If the pump of your Hal Technology Cash Counter sounds like it is working hard: 1. Ensure the inlet cap is removed. 2. If tubing is attached to the inlet, ensure there is no obstruction. Running the unit while the flow is obstructed will cause a significant reduction in the pump life.
What to do if Hal Technology Cash Counter displays garbled data on the Browsing Page?
If the data displayed on the Browsing Page of your Hal Technology Cash Counter appears garbled, it might be due to a power loss during the saving of the last record. Try clearing the last record on the Factory Settings page under Settings. If the problem persists, perform a Factory Reset, noting that all memory will be cleared.
General| Brand | Hal Technology |
|---|---|
| Model | HAL-HPC301 |
| Category | Cash Counter |
| Language | English |
To Next Page