7
Step 3: Slide the belt off the chest pad connector. (Fig. 3) .
Step 4: Now you can pull both chest pads and shoulder belts forward
through the belt slots carefully (g. 4).
Step 5: Now thread the small belts of the chest pads and harness into the
corresponding belt slots.(g. 5).
Step 6: Slide both of the chest pads in the chest pad connector, and
slide the harness straps in the harness connector. Ensure that the belt is
positioned correctly in the belt solt and not twisted.
4.2 Securing the child car seat(group I)
Step 1: Place the child safety seat on the vehicle’s seat which is tted
with 3-point safety belts ensuring it is rmly pressed against the car seat
backrest (Fig. 1).
Step 2: Pull out the vehicle belt, Thread the belt tongue (incl. vehicle belt)
through the Adult belt route slot to the rear and through the back rest.,
through the other Adult belt route slot(on the buckle side). and allow it to
lock in place. You will hear ‘click’ (Fig. 1).
To Next Page
Loading...
