Need help?Do you have a question about the Hallicrafters SX-42 and is the answer not in the manual?
General| Brand | Hallicrafters |
|---|---|
| Model | SX-42 |
| Category | Receiver |
| Language | English |
Steps for setting up the radio receiver after unpacking.
Basic steps to turn on and tune the radio receiver.
Overview of receiver features, frequency range, and power requirements.
Instructions for operating the receiver using AC power.
Guidelines for operating the receiver from a DC source.
Information on connecting speakers to the receiver.
How to connect a phonograph record player to the receiver.
Proper methods for connecting the antenna and ground.
Function of the band selector knob for choosing frequency bands.
Explanation of general coverage and bandspread tuning knobs.
How the AVC switch affects receiver sensitivity and volume.
Function of the noise limiter for reducing interference.
Operation of the receiver/standby switch.
Adjusting crystal phasing for CW reception.
Adjusting selectivity for reception sharpness.
Adjusting audio tone quality (bass, treble).
Varying the pitch of CW signals.
Adjusting the receiver's sensitivity to signals.
Procedure for calibrating the "S" meter to zero.
Procedure for replacing vacuum tubes in the receiver.
Instructions for replacing the dial lamps.
Information on obtaining assistance for service or operation.
Connecting and using the remote control relay.
Details of the product warranty and coverage.
To Next Page