Need help?Do you have a question about the Hallicrafters SX-62A and is the answer not in the manual?
General| Brand | Hallicrafters |
|---|---|
| Model | SX-62A |
| Category | Receiver |
| Language | English |
Lists key technical details including tubes, speaker/headset output, and frequency coverage.
Highlights critical operational advice for high-sensitivity receiver to avoid hiss or noise.
Instructions for unpacking and selecting a suitable location for the receiver.
Details on AC and DC power sources, including wiring diagrams.
How to connect external speakers to the receiver.
Connecting a record player to the receiver for audio playback.
Guidance on setting up single-wire and doublet antennas.
How to tune for AM and FM broadcasts using specific controls.
Explains VOLUME, RECEIVE/STANDBY, RECEPTION, BAND SELECTOR, TUNING.
How to adjust SELECTIVITY, SENSITIVITY, and TONE for optimal reception.
Steps for using the calibrating crystal for accurate frequency dial readings.
Procedures for replacing vacuum tubes and dial lamps.
Recommended initial settings for control knobs.
Instructions for restringing the dial drive cords.
Step-by-step alignment for the 455 KC intermediate frequency stage.
Step-by-step alignment for the 10.7 MC intermediate frequency stage.
Alignment procedures for radio frequency stages based on the chart.
List of resistors used in the receiver with their specifications.
List of transformers and coils with their part numbers.
List of capacitors used in the receiver with their specifications.
List of miscellaneous components like crystals and switches.
List of vacuum tubes and dial lamps with part numbers.
List of switches and their functions.
List of connectors, plugs, and sockets used in the receiver.
To Next Page