Need help?Do you have a question about the Halo BOLT AIR and is the answer not in the manual?
Connect jumper cables to battery, press 'Jump Start' button, and start vehicle. Disconnect cables afterwards.
Connect hose to item, set pressure with (+/-) buttons, then press ON/OFF to inflate.
Connect devices to USB ports and press the USB ON/OFF button to initiate charging.
Activate the LED floodlight by pressing its ON/OFF button.
Connect jumper cables to battery, press 'Jump Start' button, and start vehicle. Disconnect cables afterwards.
Connect hose to item, set pressure with (+/-) buttons, then press ON/OFF to inflate.
Connect devices to USB ports and press the USB ON/OFF button to initiate charging.
Activate the LED floodlight by pressing its ON/OFF button.
General| Brand | Halo |
|---|---|
| Model | BOLT AIR |
| Category | Remote Starter |
| Language | English |
To Next Page
