16
12. Alarms
The Radio has two individually adjustable alarm times.
12.1 Alarm settings
Youcan access the alarm settings as follows:
• Press [ ](4) to access the Settings menu.
•
Use [NA
VIGA
TE/ENTER/VOL
UME](9) to navigate to
the "Main menu" menu item.
• Conrm the selection by pressing [NAVIGATE/ENTER/
VOLUME].
• Use [NAVIGATE/ENTER/VOLUME]tonavigate to the
"Alarms" menu item.
Alarm 1and alarm 2are congured identically and allow
two separate alarm times to be saved. Choose Alarm
1or2and conrm your selection by pressing [NAVIGATE/
ENTER/VOLUME].
Set the following details using [NAVIGATE/
ENTER/VOLUME].
Mode:
Choose when the alarm is to activate:
Off –Daily –Once –Weekdays –Weekends
Time:
First choose the hour,then the minute at which the alarm
is to activate.
Mode:
Set whether you wish to be woken by an alarm tone
(buzzer), by DAB, FM or by the Internet radio.
Program:
If you selected Internet radio/ DAB/ FM,choose which
station you wish to be woken with. Youcan choose any
of the 30 preset slots or the Last listened.
Volume:
Youcan set the volume at which the alarm sound should
be played. This setting makes it irrelevant how loud you
last listened to the radio.
Saving:
Select Off /Onto complete your alarm settings.
Note
It is recommended to allow the radio to update the
time automatically.This ensures that the time is always
correct even if thereisaseparation of power supply –
for example apower cut.
12.2 Activating /deactivating the alarm
• Conrm the menu item Save in alarm settings to activate
the alarm.
• Disable the alarm by setting the Mode to Off.
12.3 Stopping the alarm/ Snooze function
• When the alarm activates, press [
]tostop the alarm.
• When the alarm activates, press [NAVIGATE/ENTER/
VOLUME]toenable snooze.
• The alarm turns off for the selected time interval
(5/10 minutes) beforeactivating once again.
13. System settings
Youcan modify all settings and access important
information about the radio in the System settings.
13.1 Network
13.1.1 Network wizard –Configuration of Internet
connection /Search
The network wizard helps you set up aconnection
between the radio and the Internet. Moremethods
of conguration and detailed information are
amplied subsequently.
• Youcan start the Network wizard as follows:
• Press [
](4) to go to the system settings.
• Use [NAVIGATE/ENTER/VOLUME](9) to navigate to
the "Network" menu item.
• Conrm the selection by pressing [NAVIGATE/
ENTER/VOLUME].
• Use [NAVIGATE/ENTER/VOLUME]tonavigate to the
"Network wizard" menu item.
• When the wizardisstarted, the radio searches for
WLAN (WiFi) connections and then shows alist of the
available networks.
• Turn [NAVIGATE/ENTER/VOLUME]toswitch amongst
the networks discovered. At the bottom of the list are
options to restart the search ("[Rescan]") or congurethe
connection yourself ("[Manual cong]").
• If your network is not found or the SSID (Service Set
Identication, that is, the name of your network) is not
shown, the network may be hidden or out of range.
In this case, try manual conguration.