37
GeTTING STARTeD
7. Getting started
7.1 Connecting and operating the radio
Warning
•Only operate the product from an approved socket that is connected to the public power supply.The
socket must be installed close to the product and must be easily accessible.
•Disconnect the product from the power supply using the On/Off switch –ifthis is not available,
unplug the power cordfromthe socket.
•Ifusing amulti-socket power strip, make surethat the total power consumption of all connected
devices does not exceed the power strip's maximum throughput rating.
•Ifyou will not be using the product for aprolonged period, disconnect it from mains power.
•Connect the network cable to aproperly installed and easily accessible network socket.
•The power supply unit is suitable for mains voltages between 100 and 240 Vand can thereforebeused
on virtually any AC power grid. Please note that acountry-specicadapter may be necessary.
•You can nd an appropriate selection of Hama products at www.hama.com.
1 23
Once the product has been connected to mains power,initialisation takes place.
The radio starts up.
To Next Page
Loading...
Need help?
General
