10
• Now select the language that you want Alexa to respond
to in the future.
• Open the Amazon Alexa app and, if necessary,enter your
access data once again. After that, you should nd the
SIRIUM soundbar among your active devices.
• Then specify your personal settings (time zone,
device name, etc.) in the Amazon Alexa app. Further
information can be found at www.amazon.co.uk -> Help
and Customer Service.
Note
• Note that location-dependent information for queries
(for example, ‘What’sthe weather?’) will only be
accurate if the correct location information was
entered in the Alexa app.
• Youcan now use Alexa as described in Chapter 12.
7.
Bluetooth
®
pairing
Youcan pair your terminal device with the soundbar via
Bluetooth
®
and use the soundbar as aplayback device for
audio signals. Youcan control playback directly on your
terminal device or using the remote control. The volume
can also be controlled directly on the soundbar.
Note –
Bluetooth
®
• Check whether your mobile device (smartphone,
tablet, etc.) is
Bluetooth
®
-capable.
• Note that the maximum range for
Bluetooth
®
is 10
metres without obstacles such as walls, people, etc.
• The
Bluetooth
®
connection may be disrupted by other
Bluetooth
®
devices/connections in the vicinity.
• It is only possible to connect the soundbar to one
terminal device.
•
Note that compatibility depends on the supported
Bluetooth
®
prolesaswellasthe
Bluetooth
®
versions
being used. (See Technical specications, operating
instructions of the terminal device in use)
• Make surethat your
Bluetooth
®
-capable terminal device
is on and
Bluetooth
®
is activated.
• Activate the
Bluetooth
®
mode by repeatedly pressing the
[MODE]button (2) on the soundbar.
• Alternatively,press [
Bluetooth
®
](13) on the remote
control.
• The
Bluetooth
®
status LED (7) begins to pulsate blue.
• Press and hold [MODE](2) for about 5seconds to
activate the pairing mode. The
Bluetooth
®
status LED (7)
begins to ash quickly.
• Open the
Bluetooth
®
settings on your terminal device
and wait until Hama SIRIUM4000ABT appears in the
list of
Bluetooth
®
devices found.
• If necessary,start searching for
Bluetooth
®
devices on
your terminal device.
• Select the Hama SIRIUM4000ABT soundbar in the list
of available devices and wait until the soundbar is shown
as connected in the
Bluetooth
®
settings on your terminal
device.
• The
Bluetooth
®
status LED (7) is now constantly lit blue.
• Start and control audio playback using the controls of
your terminal device or the remote control.
Note –
Bluetooth
®
password
• Some terminal devices requireapasswordinorder to
connect to another
Bluetooth
®
device.
• If your terminal device requests apasswordfor
connection to the speaker,enter 0000.
To Next Page
Loading...
Need help?
General
