9
4. Switching the mouse on/off
• When you insert the receiver in the storage space of the mouse, the mouse
is automatically switched off, when you remove the receiver, the mouse is
automatically switched on (picture 7).
By means of the release button on the bottom of the mouse (picture 4+6)
you can open the storage space.)
5. Connecting mouse and receiver anew (ID setting)
Proceed as described below in order to tune the mouse and receiver
anew (e.g. in case of connection problems):
• Actuate the connect button on the receiver (picture 5), then the connect
button on the bottom of the mouse (picture 4). Please pay attention to the
time window of 10 seconds.
Under www.hama.de, you will fi nd the declaration of conformity according to
the R&TTE guideline 99/5/EC.
Fig.6 Fig.7
To Next Page
Loading...
