EN © mPTech. All rights reserved. HAMMER CONSTRUCTION
33
Hammer Construction is equipped with a tray for SIM / eSIM / microSD
cards, thanks to which you can use
the phone in the following
configurations:
1. SIM 1 card + SIM 2 card
2. SIM card + eSIM card
3. SIM card + microSD card
4. Micro SD card + eSIM card
eSIM is only supported by slot 1!
In the case of OPM phones, in order to be able to fully use the eSIM
card, first, the nano eSIM card must be removed from the large card
attached, which will enable the use of the virtual eSIM profile. Next,
we need to place the nano eSIM card in slot 1 of the tray.
eSIM is only supported by slot 1!
To Next Page
Loading...
