REMOVING AND REINSTALLING THE PROPELLER
Weekly prop debris removal is an
important part of routine cleaner
maintenance. Excess debris can build
up around the prop shaft and
compromise the watertight seal.
Propellers are durable but over time
the leading edge can become rough.
Props can be sharpened with a file to
remove burrs and nicks. This makes
the prop run more smoothly and keeps
debris from snagging on it while you
vacuum. Remove the propeller before
attempting to sharpen it.
REMOVING AND REINSTALLING THE MOTOR/CORD ASSEMBLY
IMPORTANT: DO NOT attempt to remove the cord from the motor, open the black cord nut, or open the motor
in any way. Doing so can void the warranty and compromise the watertight seal.
To Next Page
Loading...