Hammerhead ONGA User Manual

OWNER’S MANUAL
Should the installer or owner be unfamiliar with the correct
installation or operation of this type of equipment you should contact
the distributor/manufacturer for the correct advice before proceeding
For the Installation, Operation and Service of
with the installation or operation of this product.

Hammerhead ONGA Specifications

General

Brand	Hammerhead
Model	ONGA
Category	Swimming Pool Vacuum
Language	English

Summary

Component Checklist

Assembly

Suction Seal Assembly

Preparations

Hose Assembly & Weights

Hose Connection Guide

Instructions for connecting hose sections securely, ensuring a proper fit.

Hose Weight Placement

Guidance on where to attach hose weights to balance the hose in the pool.

Installation

Flow Gauge Setup and Use

How to use the flow gauge for initial setup and testing of water flow.

Regulator Valve Adjustment

Adjusting the regulator valve to achieve optimal water flow for the cleaner.

Final Cleaner Connection

Balancing the Hose

How to attach hose weights to neutralize the hose's buoyancy in the water.

Fine Tuning Hose Balance

Maintenance

Trouble Shooting

Cleaner Sluggish or Stopped

Solutions for a non-operating or slow cleaner, checking blockages and flow.

Cleaner Stuck on Steps

Advice for when the cleaner gets caught on pool steps, adjusting diverters and hose.

Repetitive Cleaning Pattern

Cleaner Not Climbing Walls

Solutions for when the cleaner fails to climb pool walls, checking flow and pool shape.

Cleaner Draws Air

Cleaner Ties in Knots

Cleaner Leaves Patches

Cleaner Sticks on Walls/Floors

Cleaner Not Sitting Flat