10
Maintenance
Your Cleaner requires very little maintenance.
Check the Flapper from time to time.
1. It is quick and easy to open up the Flapper’s
chamber. Simply stop the pump, push the sliding
lock up into open position and remove the lid. With
your fi nger lift and inspect the Flapper and the
chamber to insure that it is not obstructed by debris.
See picture:
2. Place the lid back and slide the lock down to close.
3. Remove damaged or worn Flapper; no tools are
required. Simply grab the Flapper, pull and waggle
outward until it unclips from the steel pin. To install
the new Flapper push it in fi rmly onto the steel pin
until it snaps in place. If the Flapper is clipped in
the wrong way you will not be able to close the lid.
To Next Page
Loading...
