9
Installation continued
Balancing the Hose
You will also have to attach hose weights to the hose to neutralize the hose’s
buoyancy in the water. Hose weight is not required for most of the pools.
To improve cleaner’s pool coverage place 1st hose weight between the 3rd and
4th hose and the 2nd hose weight between 4th and 5th hose from the cleaner.
Hose Weights
Hose Weights
Fine Tuning
The water density in each pool may vary due to mineral and salt content.
To fi ne-tune the balance of your hose, try moving the 1st hose weight closer
towards the 2nd hose weight to improve cleaner’s pool coverage.
To Next Page
Loading...
