MIDI
13
From the previous screen, touch the PAGE RIGHT Touch Button once. The Information Center Display should now
look like this:
MIDI Drawbar Registration
This Advanced Feature allows you to decide whether you want to transmit the current Drawbar registration to a connected
MIDI device such as a sequencer, another Hammond Organ, etc. When this switch is is "ON,” the Sk-series instrument
will send Drawbar Data out to a connected MIDI device. When this switch is "OFF,” Drawbar Data will not be
transmitted.
Turn the VALUE Rotary Control to make your selection.
From the previous screen, touch the PAGE RIGHT Touch Button once. The Information Center Display should now
look like this:
MIDI External Zone
This Advanced Feature allows you to decide whether you want to transmit External Zone data to a connected MIDI device.
When this switch is is "ON,” the Sk-series instrument will send External Zone data out to a connected MIDI device.
When this switch is "OFF,” External Zone data will not be transmitted.
Turn the VALUE Rotary Control to make your selection.
To Next Page
Loading...
Need help?
General
