HAMPTON BAY 1005 131 715 User Manual (English)

Questions and Answers:

M
Megan RangelJul 25, 2025
Why is my HAMPTON BAY Fan so noisy?
- A
  Alexis ConnerJul 25, 2025
  There are several reasons why your HAMPTON BAY Fan might be noisy: * Ensure all motor housing screws are snug. * Check that the screws attaching the fan blade to the motor hub are tight. * Confirm that the wire nut connections are not rattling against each other or the interior wall of the switch housing. * Allow a 24-hour "breaking-in" period, as most noises disappear during this time. * If using a ceiling light kit, ensure the glassware is secured tightly. * Verify there's a short distance from the ceiling to the canopy and that it's not touching the ceiling. * Make sure your ceiling box is secure and that rubber isolator pads are used between the mounting bracket and outlet box.
A
Anna DavenportAug 4, 2025
How to fix a HAMPTON BAY 1005 131 715 Fan that wobbles?
- C
  christopher98Aug 5, 2025
  To fix a wobbling HAMPTON BAY Fan, verify that all blades and blade bracket screws are secure, as loose parts often cause wobble. After installation, run the fan for 10 minutes to allow it to self-adjust. If wobbling continues, check blade level: * Select a point on the ceiling above the tip of one blade. * Measure from the center of each blade to that point. * Ensure deviations are within 1/8 inch. If deviations exceed 1/8 inch, contact Customer Service (1-855-HD-HAMPTON) to order complimentary replacements of your brackets. If deviations are less than 1/8 inch and the fan still wobbles, contact Customer Service to order a complimentary Blade Balancing Kit.
F
fisherjodiAug 14, 2025
What to do if my HAMPTON BAY 1005 131 715 will not start?
- N
  nmooreAug 14, 2025
  If your HAMPTON BAY Fan will not start: * Check the main and branch circuit fuses or breakers. * Inspect the line wire connections to the fan and switch wire connections in the switch housing. * Ensure the frequency switches on the remote control and receiver are set to the same frequency.