HAMPTON BAY 1005 919 929 User Manual (English)

Questions and Answers:

M
Michael EllisAug 9, 2025
What to do if my HAMPTON BAY 1005 919 929 will not start?
- M
  Mark EstesAug 9, 2025
  If your HAMPTON BAY Fan isn't starting, try these steps: First, check the main and branch circuit fuses or breakers. Next, inspect the line wire connections to the fan and the switch wire connections in the switch housing. Also, verify the battery in the remote control is working. Make sure you are within the normal operating range of 10-20 feet for the remote. Finally, turn off the power supply before checking the dip switch settings.
J
Jody BradleyAug 18, 2025
Why is my HAMPTON BAY Fan so noisy?
- D
  Dustin MillsAug 18, 2025
  A noisy HAMPTON BAY Fan can be disruptive. Here's what to check: * Ensure all motor housing screws are snug. * Make sure the screws attaching the fan blade bracket to the motor hub are tight. * Confirm the wire nut connections aren't rattling against each other or the inside of the switch housing. Allow the fan a 24-hour "breaking in" period, as most new fan noises disappear during this time. If you're using a light kit, tighten the screws securing the glassware and check the light bulbs. Also, ensure the canopy has a small gap from the ceiling and that your outlet box is secure with rubber isolator pads between the mounting plate and outlet box.
J
Jennifer HobbsAug 29, 2025
How to fix a wobbling HAMPTON BAY Fan?
- C
  Christopher BookerAug 29, 2025
  To address a wobbling HAMPTON BAY Fan, first ensure that all blade and blade arm screws are secure. Most wobble issues arise from unequal blade levels. To check this, measure from a point on the ceiling to the tip of each blade, ensuring any deviation is within 1/8 inch. Run the fan for ten minutes, and if wobbling persists, contact Customer Service for a balancing kit.

HAMPTON BAY 1005 919 929 Specifications

General

Model	1005 919 929
Category	Fan
Type	Ceiling Fan
Blade Span	52 inches
Motor Type	AC Motor
Number of Blades	5
Light Kit	Yes
Control Type	Remote Control
Finish	Brushed Nickel
Light Included	Yes
Reversible Motor	Yes
Warranty	Limited Lifetime