HAMPTON BAY 84075 User Manual

1
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
PACKAGE CONTENTS
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install in shad-
ed areas as these areas will not allow the batteries to fully charge and will reduce
the nighttime operating hours for your light. Ensure that the installation location
is away from other nighttime light sources such as street or porch lamps. These
light sources may prevent your solar light from automatically turning on.
Part Description Quantity
A Top cover
20
B
AA 900 mAh, Ni-Mh rechargeable battery
(pre-installed)
20
C Battery cover
20
D Housing
20
E Post
20
F Stake
20
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the
solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and
season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
NOTE: Do not use a hammer. If the ground is hard, use water to soften or a
trowel to loosen the soil.
Preparing for installation Installing the solar path light in the ground
□ Attach the post (E) to the stake (F).
□ Push the assembly rmly into the ground.
1 2
Solar LED Path Light
Use and Care Guide
Item #1002 654 611
Model #84075
□ Firmly slide the post (E) into the solar housing (D).
□ FOR FIRST TIME USE: Remove the pull tab between the top cover (A)
and the housing (D).
BA
D
E
F
C
D
A
D
E
F
E

HAMPTON BAY 84075 Specifications

General

Brand	Hampton Bay
Model Number	84075
Material	Metal
Style	Traditional
Light Source	Incandescent
Number of Bulbs Required	1
Power Type	Hardwired
Voltage	120
Dusk to Dawn	No
UL Listed	Yes
Wet Location Rated	Yes
Light Bulb Type Included	No
Number of Lights	1

Summary

Planning for Successful Assembly

Choosing the Right Location

Install your solar light in a location with full, direct sunlight to ensure optimal charging and nighttime operation.

How Solar Works

Explains how the solar panel converts sunlight into electricity, stored in batteries for nighttime use.

Assembly and Installation

Preparing for Installation

Instructions for initial setup steps, including removing a pull tab and attaching the post.

Installing the Solar Path Light in the Ground

Guidance on securing the light post into the ground, with tips for hard soil conditions.

Maintenance

Replacing the Battery

Detailed steps for replacing the rechargeable battery, including cautions and recommendations.

Charging the Battery

Advice on optimal charging duration and cycles for maximum battery capacity.

Winter Tips

Recommendations for maintaining the solar light during winter, especially concerning snow cover.

Care & Cleaning

Cleaning the Solar Panel

Instructions for cleaning the solar panel using a damp cloth, avoiding chemicals.

Troubleshooting

Common Issues and Solutions

Addresses common problems like short runtime or lights not turning on, providing solutions.

Warranty Information

Product Warranty Details

Outlines the manufacturer's warranty period, coverage, and limitations for the product.