l
8
Assembly (continued)
Care and Cleaning
For best results, clean the chair with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Keep the chair away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
Store the chair in a dry, sheltered place when not in use.
Do not clean with abrasive materials, bleach, or solvents.
4
CHECKING THE CHAIR
Turn the chair right side up.
Ensure all connections are secure before use.
Place the seat cushion (E) to finish the assembly of the chair.
E
Once all of the bolts are in place, fully tighten the bolts using the hex wrench (BB).
To Next Page
Loading...
Need help?
General
