Why do HAMPTON BAY Fan lights shut off and not come back on?
The light kit might be disabled because the unit is equipped with a wattage limiting device. If the total wattage of the bulbs exceeds 190 watts, the light kit will be disabled. To reset it, turn off the power, reduce the bulb wattage to under 190 watts, and then restore power.
What to do if my HAMPTON BAY Fan remote control is not working?
If your remote control isn't working, make sure that the fan is not connected to any wall mounted variable speed controls and that the dip switches are set correctly.
How to fix a noisy HAMPTON BAY BROOKHURST YG268-WH Fan?
A noisy fan can be caused by several factors: 1. Ensure all motor housing screws are snug. 2. Check that the screws attaching the fan blade arm to the motor hub are tight. 3. Make sure wire nut connections are not rattling. 4. Allow a 24-hour "breaking-in" period for new fans. 5. If using a light kit, tighten the glass screws and ensure the bulb is secure. 6. Verify there's a small gap between the ceiling and the canopy. 7. Confirm the ceiling box is secure, using rubber isolator pads between the mounting bracket and outlet box.
How to troubleshoot a HAMPTON BAY Fan that will not start?
If your fan doesn't start, check the following: * Main and branch circuit fuses or breakers. * Line wire connections to the fan and switch wire connections in the switch housing. * Ensure the dip switches on the remote control and receiver are set to the same frequency.
Why is my HAMPTON BAY BROOKHURST YG268-WH Fan wobbling?
Fan wobble can occur for several reasons: * Ensure that all blade and blade arm screws are secure. * Unequal blade levels often cause wobble. Measure the distance from each blade tip to the ceiling; deviations should be within 1/8 inch. Let the fan run for 10 minutes. * If the wobble persists, use the blade balancing kit included with your HAMPTON BAY Fan.
General| Brand | Hampton Bay |
|---|---|
| Model | Brookhurst YG268-WH |
| Type | Ceiling Fan |
| Style | Traditional |
| Color | White |
| Blade Span | 52 inches |
| Number of Blades | 5 |
| Motor Type | AC Motor |
| Control Type | Pull Chain |
| Speed Settings | 3 |
| Reversible Motor | Yes |
| Mounting Type | Downrod Mount |
| Light Kit Included | No |
| Indoor/Outdoor Use | Indoor |
General precautions for installation and operation to prevent hazards.
Critical warnings regarding electrical safety, personal injury, and proper mounting.
Information on the built-in wattage limiter for the light kit.
Technical details including size, voltage, current, wattage, RPM, CFM, and weight.
Essential tools needed for fan installation and assembly.
Detailed list of all included hardware components with part numbers and quantities.
Visual and textual identification of all fan components included in the package.
Information on the two available mounting methods and their height differences.
Details on selecting the correct outlet box and mounting methods for fan support.
Instructions for assembling the fan using the standard downrod mounting method.
Instructions for assembling the fan using the close-to-ceiling mounting method.
Steps for securely attaching the fan motor assembly to the electrical box mounting bracket.
Procedure for securing the safety cable to the building structure for added safety.
Instructions for setting up the remote control receiver and pairing it with the remote.
Detailed steps for connecting the fan's wires to the house wiring and receiver.
Steps for attaching the canopy to the mounting bracket for standard ceiling mounting.
Steps for attaching the canopy to the mounting bracket for close-to-ceiling mounting.
Instructions for attaching fan blades to blade arms and then securing the assemblies to the motor.
Steps for connecting the light kit, mounting glass shades, and installing light bulbs.
Guide to using the remote control buttons for fan speed, light, and brightness.
Instructions for installing the wall-mounted holder for the remote control.
Explanation of the reverse switch function for summer and winter modes.
Recommended maintenance tasks like checking screws and cleaning with a soft cloth.
Prohibited cleaning methods to avoid damage or electrical hazards.
Steps to diagnose and fix issues when the fan does not start.
Troubleshooting steps for identifying and resolving unusual fan noises.
Guidance on what to do if the light kit shuts off unexpectedly.
Steps to troubleshoot problems with the remote control functionality.
Methods to diagnose and correct fan wobble, including using a balancing kit.
Comprehensive list of all fan components with their corresponding part numbers and descriptions.
To Next Page