To Next PageTo Next PageWhat to do if my HAMPTON BAY Fan will not start?
If your HAMPTON BAY Fan won't start, check the main and branch circuit fuses or breakers. Also, check the line wire connections to the fan and switch wire connections in the switch housing.
Why is my HAMPTON BAY GAZEBO YG188-BN so noisy?
If your HAMPTON BAY Fan is making noise, ensure all motor housing screws are snug. Also, check that the screws attaching the fan blade arm to the motor hub are tight. Make sure wire nut connections are not rattling against each other or the interior wall of the switch housing. Allow a 24-hour "breaking-in" period, as most noises disappear during this time. If using a ceiling light kit, make sure the glassware and light bulb are secured tightly. Ensure there is a short distance from the ceiling to the canopy, without touching the ceiling. Finally, verify that your ceiling box is secure and rubber isolator pads are used between the mounting bracket and outlet box.
How to fix a wobbling HAMPTON BAY GAZEBO YG188-BN?
If your HAMPTON BAY Fan wobbles, start by checking that all blade and blade arm screws are secure. Most wobble issues occur when blade levels are unequal. To check this, measure from a point on the center of each blade to a point on the ceiling above the blade tip; deviations should be within 1/8 inch. You may also run the fan for ten minutes. If the wobble is still noticeable, use the enclosed blade balancing kit.
General| Brand | Hampton Bay |
|---|---|
| Model | YG188-BN |
| Type | Ceiling Fan |
| Fan Diameter (in.) | 52 |
| Blade Span | 52 inches |
| Number of Blades | 5 |
| Motor Speed | 3-speed |
| Mounting Type | Downrod |
| Material | Metal |
| Finish | Brushed Nickel |
| Light Kit Included | Yes |
| Light Type | LED |
| Warranty | Limited Lifetime |
Technical details including Fan size, Speed, Volts, Amps, Watts, RPM, CFM, N.W., G.W., C.F.
Lists the necessary tools for installation.
Lists all parts and their quantities included in the package.
Lists all components of the fan package with illustrations.
Explains the two types of hanging assemblies: standard and close-to-ceiling.
Details options for mounting the fan to the electrical box.
Instructions for preparing the canopy components.
Instructions for preparing the motor assembly.
Instructions for assembling the fan parts together.
Instructions for preparing canopy for close-to-ceiling mount.
Instructions for preparing the motor for close-to-ceiling mount.
Instructions for assembling fan for close-to-ceiling mount.
Instructions for connecting the fan to the electrical box.
How to hang the fan for standard ceiling mount.
How to hang the fan for close-to-ceiling mount.
Detailed steps for making electrical wire connections.
Securing the canopy for standard ceiling mount.
Securing the canopy for close-to-ceiling mount.
Instructions for removing protective packing mounts.
Steps for attaching fan blades to the blade arms.
Connecting the assembled blades to the fan motor.
Connecting the light kit to the fan's switch housing.
Securing the light bulb and glass shade.
Optional steps for assembling the fan without the light kit.
How to use the pull chains to control fan speed and light.
How to operate the reverse switch for airflow direction.
Guidelines for proper fan maintenance and cleaning.
Solutions for when the fan fails to power on.
Troubleshooting steps for fan noise.
Resolving issues related to fan wobble.
Diagrams and descriptions of all replacement parts.
