a. Mounting Hardware
(1 hanger pin, 1 locking pin,
1 rubber gasket)
b. Electrical Hardware & Balancing Kit
(3 plastic wire connectors, 1 pull chain
for the fan, 1 pull chain for the light,
balancing kit)
c. Extra Blade Bracket Hardware
(1 screw and lockwasher)
6. Extra Switch Cup Cover
7. Blades (5)
8. Blade Bracket
9. Glass Shades (3)
10. Bulbs (3)
1. Mounting Plate (inside canopy)
2. Canopy
3. Ball/Downrod Assembly
4. Fan Motor Assembly with
pre-installed Blade Brackets (4)
5. Light Fixture
2. Unpacking Your Fan
IMPORTANT: THIS PRODUCT AND/OR COMPONENTS ARE COVERED
BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,947,436;
5,988,580; 5,971,573; 6,010,306; 6,039,541; 6,046,416 AND OTHER
PATENTS PENDING.
Unpack your fan and check the contents. You should have the following items:
To Next Page
Loading...
