To Next PageTo Next PageWhat to do if my HAMPTON BAY PALMARIA EF200S(X)-52 Fan will not start?
If your HAMPTON BAY Fan won't start, check the main and branch circuit fuses or breakers. Also, check the line wire connections to the fan and the switch wire connections in the switch housing.
Why is my HAMPTON BAY Fan so noisy?
If your HAMPTON BAY Fan is noisy, start by ensuring all motor housing screws are snug. Also, check that the screws attaching the fan blade bracket to the motor hub are tight. Make sure the wire nut connections aren't rattling against each other or the interior wall of the switch housing. Allow a 24-hour “breaking in” period, as most noises disappear during this time. If you're using a light kit, ensure the screws securing the glassware are tight and the light bulbs are secure. Confirm the canopy isn't touching the ceiling and that your outlet box is secure, with rubber isolator pads used between the mounting plate and outlet box.
How to fix a wobbling HAMPTON BAY PALMARIA EF200S(X)-52?
If your HAMPTON BAY Fan wobbles, first check that all blade and blade arm screws are secure. Most fan wobble problems are caused when blade levels are unequal. Check this level by measuring from a point on the center of each blade to the ceiling, ensuring any deviation is within 1/8 inch. Run the fan for ten minutes, and if wobbling continues, contact Customer Service for a balancing kit.
General| Type | Ceiling Fan |
|---|---|
| Number of Blades | 5 |
| Motor Type | AC |
| Light Kit | Yes |
| Control Type | Remote control |
| Fan Diameter (In.) | 52 |
| Light Type | LED |
| Light Kit Included | Yes |
| Reversible Motor | Yes |
| Blade Span | 52 inches |
| Mounting Options | Downrod |
| Blade Finish | Walnut |
| Warranty | Lifetime |
