EasyManua.ls Logo

Hamron 012452 - Safety Instructions; Technical Data

Hamron 012452
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
25
TECHNICAL DATA
Camera
Supply voltage 8–30 VDC
Power consumption max 220 mA
Image sensor CMOS
Resolution 640 x 480
Lens 1.7 mm / F 2.0
Transmit frequency 2.4 GHz (ISM band)
Max transmission distance in open air 100 m
Protection rating IP65
Monitor
Supply voltage 8–30 VDC
Power consumption,
standby mode max 70 mA
Power consumption,
operating mode max 180 mA
Monitor size 10.9 cm / 4.3 inch
Resolution 480 x 272
Operating temperature –10 to 50°C
Electromagnetic interference/
radio interference
The product is not sensitive to interference
from Bluetooth, mobile phones, Wi-Fi routers,
power lines and other electrical equipment.
DESCRIPTION
Connects to the car’s 12/24 V system.
Wide-angle camera ideally mounted at
the rear of the car or trailer.
Equipped with integrated antenna.
Light boost with IR light to improve
visibility in the dark.
Wireless digital transfer to a 4.3" LCD
display.
The display can be connected to two
dierent cameras simultaneously (one
camera included).
SAFETY INSTRUCTIONS
Reverse the vehicle slowly when using the
reversing camera.
Never reverse the vehicle by just looking at
the monitor.
Do not use the reversing camera when
there is crossing trac, or the risk of
accidents and personal injury.
Note that the area shown on the monitor
is limited.
Installation required knowledge of
electrical installations and the removal
and tting of panels and other items in
the car. If in doubt, have an experienced
technician familiar with electrical systems
install the unit. Incorrect connection of
the power cable can result in damage to
the vehicle and personal injury.
The unit is not sensitive to interference
from mobile phones, Bluetooth, Wi-Fi
routers, live wires and other electrical
equipment.
Never modied or attempt to repair the
camera.
Do not look into the infrared diodes on
the camera, this can cause eye damage.
Do not install the monitor so that it blocks
the view of the driver.
Do not install the monitor in such a way
that it could be hit by a triggered airbag,
or could prevent an airbag from working
properly.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.

Related product manuals