Hamron 608-207 - Use; Intended Use; Charge the Auxiliary Starter Battery

EN
25
USE
INTENDED USE
• The auxiliary starter is intended to start cars, boats etc. with 12V batteries.
• The auxiliary starter has a 12V outlet which can be used to power most appliances that are
designed to be connected to a 12V outlet (max. 15A).
• LED light for emergency lighting.
• 200W inverter to power appliances designed for 230V. Indicator lights for inverter status.
• The built-in battery in the auxiliary starter can be charged with an external charger connected to
the charging connection. The auxiliary starter has a built-in overcharge protection.
• 5V USB connection for charging mobile phones etc.
• Indicator lights showing battery level.
CHARGE THE AUXILIARY STARTER BATTERY
NOTE:
• Charge the built-in battery in the auxiliary starter before using it for the rst time.
• Check the charge level in the built-in battery by pressing the battery control switch and reading
the indicator lights. If the red indicator light comes on, the battery should be charged.
• Always keep the battery fully charged for best results and battery life. The battery capacity and
lifetime will be aected if it is left discharged for a long time.
1. Manometer
2. 12V outlet
3. Emergency lighting
4. Charging connection
5. Indicator light for correct/incorrect connection
6. Power switch for compressor/USB
7. 5V USB connection
8. Power switch
9. Indicator light for correct/incorrect connection
10. Indicator lights for charge level
11. Battery control button/switch for emergency light
12. Compressor compartment
13. Inverter fuse
14. Indicator light for inverter fault
15. 230V outlets
16. Indicator light for inverter
17. Inverter power switch