To Next PageTo Next PageWhat to do if consumer and error icons flash on Hamron 010501 Controller?
If there's no output to the consumer and the consumer and error icons are flashing on your Hamron Controller, it indicates an overload. To resolve this: 1. Disconnect some of the connected consumers to lower the power output. 2. Restart the charge controller. 3. Wait for a complete night/day cycle (night time > 3 hours).
Why is my Hamron Controller not working?
If your Hamron Controller isn't working despite correct lead connections, the battery voltage may be too low. Measure the battery voltage; the charge controller requires at least 8 V to activate.
Explains solar panel performance curves and MPPs.
Discusses detecting multiple maximum power points.
Holds charging current constant at maximum level.
Switches to constant voltage, gradually reducing current.
Used to avoid overheating and excessive gas.
Balances cell voltages and counteracts stratification.
Compensates self-discharging, leakage, and small losses.
General guidelines before starting the installation process.
Requirements for different solar panel types.
Calculating series connections based on panel specs.
Discusses handling high power solar panels.
Ensuring adequate airflow for the charge controller.
Specifies the order for connecting system components.
Guidelines for proper grounding of the system.
Role and usage of the temperature sensor.
Instructions for RS485 communication setup.
Steps to initiate the charge controller's operation.
Calculating conductor area for solar panel cables.
Adapting conductor area for battery and consumer cables.
Explains the function of different buttons.
Information presented on the device display.
Interpreting various status icons and readings.
Understanding and responding to error messages.
Procedure to reset energy generation data.
Changing the display unit for battery temperature.
Selecting the appropriate battery type for the system.
Voltage thresholds and durations for different battery types.
Configuring the load output modes and timing.
General| Brand | Hamron |
|---|---|
| Model | 010501 |
| Category | Controller |
| Language | English |
