EasyManua.ls Logo

Hamron 608201 - Using the Battery Charger; Operating Conditions and Positioning

Hamron 608201
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
EN
3. Winter mode 12 V standard battery and 12 V AGM battery.
Suitable at 5°C or lower.
4. Charging current 6 V standard lead-acid battery: 1A/2A/3A/4A.
The charging current is set automatically, depending on the battery
capacity and/or charging.
5. Battery charging indicator: Each segment represents a 20% charge.
A ashing frame indicates that the battery is charging. The batter is
fully charged when the frame and all ve segments light up and the
battery charger then switches to trickle charging.
6. Battery voltage, resolution 0.1 V.
7. Indicates polarity fault.
8. Indicates defective battery.
9. Symbol for battery clip.
10. Unit.
USE
Operating conditions and positioning
Store and use the battery charger in a dry and well ventilated area,
protected from heat and direct sunlight and from corrosive gas. Place
the charger on a stable surface when charging, as far away from the
battery as permitted by the leads.
Operating temperature: -10 to 40°C
Storage temperature: -10 to 50°C
Never place the charger on the battery, or the battery on the charger.
Reduce the charging current if the battery temperature exceeds 40°C
during charging. Stop the charging if the battery temperature exceeds
45°C and allow the battery to cool to the permitted charging
temperature before resuming the charging.

Related product manuals