EasyManua.ls Logo

Hamtronix Elektra 2000 User Manual

Hamtronix Elektra 2000
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Hamtronix
Repeater Controller
Elektra 2000
Instruction Manual
Software V2.10
Hardware Revision H
Question and Answer IconNeed help?

Do you have a question about the Hamtronix Elektra 2000 and is the answer not in the manual?

Hamtronix Elektra 2000 Specifications

General IconGeneral
BrandHamtronix
ModelElektra 2000
CategoryRepeater
LanguageEnglish

Summary

Technical Support and Contact

Fast Technical Support

Contact for technical assistance via phone or email for troubleshooting and inquiries.

Precautions and Warranty Information

Limited Warranty and Firmware Updates

Covers warranty terms, limitations, and procedures for updating controller firmware.

Connectors Overview

CN1 - Repeater (RPT) Connector

Defines pins and signals for the repeater connection interface.

CN2 - LINK Connector

Defines pins and signals for the link connection interface.

CN3 - Remote Connector

Defines pins and signals for the remote control interface.

Connector Pin Out Diagrams

Visual representation of the pin assignments for each connector.

Installation and Audio Setup

Determining COR Logic

Explains how to identify positive or negative COR logic from the receiver.

Audio Quality Considerations

Discusses audio fidelity, pre-emphasis, and de-emphasis for repeater audio.

Initial Setup and Operation

First Time Controller Power On

Instructions for initial controller startup and testing connections.

Audio Adjustments and LED Indicators

Guides on adjusting audio levels and understanding LED indicators.

Fan Control and Audio Equalization

Details on fan output functionality and audio equalization methods.

Basic Operation and Commands

Remote Control Overview

How to control the repeater remotely using a DTMF keypad.

Command Syntaxes Explained

Explains the format and components of DTMF commands.

Function Descriptions - Part 1

Transmitter Enable and Hang Time

Controls transmitter activation and sets the hang time duration.

Courtesy Tone Settings

Configures courtesy tone delay, duration, and frequency.

Courtesy Tone Selection

Chooses the type of courtesy tone to be used.

Function Descriptions - Part 2

Roller Beep and Confirmation Tone

Manages courtesy tone cycling and confirmation sound types.

Time-Out Action and ID Test

Handles time-out events and provides a function for testing IDs.

CTCSS Configuration

Enables CTCSS requirement for repeater and link ports.

ID Timer Settings

Sets the interval for transmitting ID messages (voice or CW).

Function Descriptions - Part 3

ID Selection and CW ID Frequency

Determines ID type and sets the tone frequency for CW IDs.

CW ID Speed and Setup

Adjusts the transmission speed for CW IDs and configures the message.

Function Descriptions - Part 4

Voice ID Recording and Alarm Input

Records voice messages for ID and configures the alarm input.

Monitor Input and Repeater Port

Configures the monitor input and controls repeater port access.

Link Port and Transmitter Test

Manages link port operations and provides transmitter testing.

Function Descriptions - Part 5

Simplex Repeater and Time-Out

Configures simplex repeater mode and repeater time-out limits.

Remote Outputs and DTMF Control

Manages remote outputs and enables DTMF control of the repeater.

DTMF Mute and Password Setup

Configures DTMF mute behavior and allows password changes.

Function Descriptions - Part 6

Reset and Message Lock

Resets the controller and protects voice messages from erasure.

Button, Duration, and Priority Settings

Configures button actions, message duration, and ID priority.

Super User Mode and Tone Editor

Enables Super User mode and custom courtesy tone creation.

Master and Full Reset Procedures

Contact and Service Information

Repair Address and Support Contacts

Provides Hamtronix repair address and customer support contact details.