To Next PageTo Next Page
Need help?Do you have a question about the Hamworthy STRATTON MK3 Series and is the answer not in the manual?
Guidelines for safely storing and transporting the boiler unit.
Explanation of icons and symbols used throughout the manual for clarity.
Specifies the required qualifications for individuals performing installation, adjustment, and maintenance.
Critical safety guidelines and regulations applicable to the installation and use of the boiler.
Details on water quality, scaling, corrosion prevention, and system monitoring.
Requirements for ambient air quality to ensure correct combustion and prevent corrosion.
Outlines the boiler's adherence to relevant UK safety and performance directives.
Specifies installation requirements that may differ in countries other than the UK.
Identifies the gas types and categories for which the boiler is approved and configured.
Details the required nominal, minimum, and maximum gas supply pressures for operation.
Provides all physical dimensions of the boiler unit and its components for installation planning.
Identifies and illustrates the various internal and external components of the boiler.
Presents detailed combustion performance data for different models and gas types.
Specifies the environmental and system conditions under which the boiler is designed to operate.
Outlines the electrical supply requirements, power consumption, and wiring specifications for the boiler.
Step-by-step guide for physically mounting and securing the boiler unit to the wall.
Instructions for safely accessing internal components by removing and refitting the front panel.
Guidance on connecting the flue system, including ventilation, chimney types, and assembly.
Procedures for connecting the gas supply, including cleaning the line and checking for leaks.
Steps for converting the boiler from natural gas (G20) to propane (G31) by qualified professionals.
Guidance on connecting the boiler to the heating system pipework, including pump sizing.
Instructions for correctly wiring the boiler, including safety precautions and control panel access.
Pre-start checks including water pressure, gas connections, and panel closure.
Steps for initial boiler start-up, heat request, and combustion checks.
Verifying that condensate removal pathways are unobstructed after commissioning.
Ensuring the gas pipe diameter is correctly sized and checking regulator safety.
Step-by-step instructions for safely draining the boiler water for maintenance.
Periodic inspection and maintenance tasks to ensure the boiler operates safely and efficiently.
Explains the various symbols used in the hydraulic diagrams for understanding system layouts.
An index listing all available hydraulic diagrams for different boiler configurations.
Lists and describes optional accessories that can be fitted directly onto the boiler unit.
Lists and describes optional accessories that are installed externally to the boiler.
General