Hanasis ITX-D255R - Chapter3 UEFI SETUP UTILITY; Introduction

ITX-D255R Mini-ITX Mother Board Manual
19 / 31
Chapter3. UEFI SETUP UTILITY
3.1 Introduction
This section explains how to use the UEFI SETUP UTILITY to configure your system. The UEFI chip on the motherboard stores the UEFI
SETUP UTILITY. You may run the UEFI SETUP UTILITY when you start up the computer. Please press <Del> during the Power-On-Self-
Test (POST) to enter the UEFI SETUP UTILITY, otherwise, POST will continue with its test routines. If you wish to enter the UEFI SETUP
UTILITY after POST, restart the system by pressing <Cntl>+<Alt>+<Delete>, or by pressing the reset button on the system chassis.
You may also restart by turning the system off and then back on.
Because the UEFI software is constantly being updated, the following UEFI setup screens and descriptions are for reference
purpose only, and they may not exactly match what you see on your screen.
3.1.1 UEFI Menu Bar
The top of the screen has a menu bar with the following selections :
Menu Description
Main To set up the system time/date information
Advanced To set up the advanced UEFI features
Feature To set up other features
Chipset To display Memory & Graphics features
Boot To set up the default system device to locate and load the Operating System
Security To set up the security features
Exit To exit the current screen or the UEFI SETUP UTILITY
Use <←> key or <→> key to choose among the selections on the menu bar, and then press <Enter> to get into the sub screen. You
can also use the mouse to click your required item.
3.1.2 Navigation Keys
Please check the following table for the function description of each navigation key.
Navigation Key(s) Function Description
← / →
Moves cursor left or right to select Screens
↑ / ↓
Moves cursor up or down to select items
+ / - To change option for the selected items
<Enter> To bring up the selected screen
<F1> To display the General Help Screen
<F7> Discard changes
<F9> To load optimal default values for all the settings
<F10> To save changes and exit the UEFI SETUP UTILITY
<ESC> To jump to the Exit Screen or exit the current screen