Specifications
Wingspan: .............. 56 in (1422 mm)
Length: ................... 56 in (1441 mm)
Wing Area: ............ 714 sq in (46.1 sq dm)
ASSEMBLY MANUAL
FuntanaS™ .40
The new FuntanaS™ .40 3D ARF was designed exclusively for Hangar 9
®
by Italy’s most famous 3D pilot,
Sebastiano Silvestri. He based the FuntanaS on his highly successful KatanaS TOC design. The result is a
budget-friendly .40-size airplane with unlimited 3D performance.
The FuntanaS can do it all—harriers, torque rolls, blenders, and almost anything else you can dream up.
It’s all possible, thanks to an extremely lightweight, all-wood airframe and big control surfaces that give
the FuntanaS a very impressive thrust to weight ratio and crisp control authority at any airspeed.
Sebastiano’s signature UltraCote
®
trim scheme and factory painted parts such as the cowl and wheel
pants complement the performance perfectly.
Weight:................... 4–5.5 lbs (1.8 Kg–2.5 Kg)
Radio: ..................... 4-channel w/5 servos
Engines: ...................32–.46 2-stroke, .40–.72 4-stroke
To Next Page
Need help?
General