To Next PageTo Next Page
Need help?Do you have a question about the HANGCHA CPCD30/35-XW43C-RT4 and is the answer not in the manual?
Important safety guidelines for operating the forklift.
Comprehensive rules for safe operation, inspection, and environmental considerations.
Understanding load center distance and maximum load limits.
How to safely start, travel, and handle loads with the forklift.
Steps for starting, driving, picking up, stacking, and removing loads.
Periodic maintenance schedules from daily to annual.
General maintenance cautions and system-specific schedules.
General| Model | CPCD30/35-XW43C-RT4 |
|---|---|
| Category | Forklifts |
| Load Capacity | 3000-3500 kg |
| Engine Type | Diesel |
| Lift Height | 3000 mm |
| Transmission | Automatic |
| Load Center | 500 mm |
| Tire Type | Pneumatic |
| Overall Height | 2200 mm |
| Travel Speed (full load) | 20 km/h |
| Travel Speed (no load) | 22 km/h |
| Overall Width | 1300 mm |
| Lift Speed (no load) | 520/520 mm/s |
| Turning Radius | 2400 mm |
