Need help?Do you have a question about the HANGCHA CPCD35N-RW33M and is the answer not in the manual?
General| Model | CPCD35N-RW33M |
|---|---|
| Load Capacity | 3500 kg |
| Power Type | Diesel |
| Lifting Height | 3000 mm |
| Travel Speed (laden) | 20 km/h |
| Lift Speed (laden) | 480 mm/s |
| Tire Type | Pneumatic |
| Service Weight | 4850 kg |
| Load center distance | 500 mm |
| Category | Forklifts |
| Rated Load | 3500 kg |
Comprehensive safety rules for operation and maintenance.
Daily checks for leaks, appearance, and fluid levels.
Guidelines for periodic replacement of critical safety parts.
Factors affecting truck stability and load limits.
Step-by-step guide for starting the engine.
Instructions for driving and changing gears.
Procedures for picking up and stacking loads.
Steps for safely removing loads.
Proper methods for stopping and parking the truck.
Procedures for starting the engine using LPG or gasoline.
To Next Page