Need help?Do you have a question about the HANGCHA CPCD25N-RW10 and is the answer not in the manual?
General| Model | CPCD25N-RW10 |
|---|---|
| Category | Forklifts |
| Load Capacity | 2500 kg |
| Load Center Distance | 500 mm |
| Lift Height | 3000 mm |
| Mast Type | 2-stage |
| Engine Type | Diesel |
| Overall Width | 1150 mm |
| Weight | 3800 kg |
| Tire Type | Pneumatic |
| Lowering Speed (loaded) | 450 mm/s |
| Lowering Speed (unloaded) | 400 mm/s |
| Fuel Tank Capacity | 60 L |
| Free lifting height | 150 mm |
| Engine | Xinchai 490BPG |
| Lift Speed (unloaded) | 500 mm/s |
Daily pre-operation checks for safety and functionality.
Procedures for starting the diesel or gasoline engine.
Guidelines for safe and efficient truck travel.
Method for picking up loads with forks.
Procedure for safely stacking loads.
Method for removing loads from storage.
To Next Page