To Next PageTo Next Page
Need help?Do you have a question about the HANGCHA CPCD25-XW98E-RT2 and is the answer not in the manual?
Routine checks performed before operating the forklift, including fluid levels and visual inspection.
Procedures for starting the diesel or gasoline engine, including preheating and warm-up.
Guidance on operating the truck, including steering, fork positioning, and braking.
Daily parking procedures, including securing the truck and performing basic checks.
Safety features related to forward/reverse operation and driver presence sensing.
General| Load Capacity | 2500 kg |
|---|---|
| Lift Height | 3000 mm |
| Load Center Distance | 500 mm |
| Engine Type | Diesel |
| Overall Width | 1150 mm |
| Lifting Speed (laden) | 480 mm/s |
| Lowering Speed (unladen) | 500 mm/s |
| Max. gradeability (laden) | 20 % |
| Tire Type | Pneumatic |
| Fuel Tank Capacity | 60 L |
| Free lift | 150 mm |
| Overall Height (mast lowered) | 2050 mm |
| Overall Height | 2050 mm |
