HANGCHA CPCD25-XW98E-RT2 - DPF Emissions Function Setting Page; Maintenance Reminder Maintenance Page; Remaining Hours Query Page; Maintenance Time Reset Page

16
page of advanced settings maintenance personnel
 Return to main page: press key 1 to return to main page
(2) DPF Emissions function setting page (Diesel engine)
请求再生
返回
禁止再生
取消禁止
Regen
Back
Inhibit
Cancel inhibit: press the key 4,The DPF is to burn (DPF-regenerate) trapped particulate
matters in an automatic way.
Inhibit: press key 3，DPF-regenerate function of OFF
Regen: press key 2, Turn on DPF parking regeneration
Return to the setting page: press key 1 to return to the setting page
(3) Maintenance reminder maintenance page
a.Remaining hours query page
重置
返回
Reset
Back
Reset: press the key 2 to jump to the maintenance time reset page to reset the remaining
hours of maintenance to the Set the initial value (maintenance interval).
Back: press key 1 to return to the setting page
b. Maintenance time reset page
确定
返回
Confirm
Back
Confirm：press the key 2 to confirm the reset. After the confirmation, it will automatically return
to the maintenance query page.
Back: press key 1 to return to the setup page.