3. Running after storing for a long time
① Remove the antirust oil from the
exposed parts.
②Drain the gear oil of the crankcase,
driving axle, hydraulic transmission box
(torque converter type) clear it and add
with new gear oil.
③Clean the hydraulic oil reservoir and
fuel reservoir (removing any dirt or water)
and add with new hydraulic oil/fuel.
④Check the clearance of the valve, gas
valve cap and other parts on the engine.
⑤Add antifreeze to required level.
⑥Charge the battery, install on the truck
and connect battery lead.
⑦ Check basic truck functions like
starting, running, turning, lifting etc.
⑧Warm-up your truck.
To Next Page
Loading...
