EasyManua.ls Logo

HANGCHA CPCD25-XW98E-RT2 - Engine Oil Pressure Alert Lamp; Charging Indicator; Left Turning Indicator [M]; Right Turning Indicator [N]

HANGCHA CPCD25-XW98E-RT2
103 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Engine oil pressure alert lampK
This lamp indicates the pressure condition of
engine lube oil. Although it lights up when the
engine switch is set at ―ON‖, once the engine
starts up and the accelerator pedal is pressed,
this lamp goes out.
Caution
If this light continues to stay lit or lights up
during operation, the pressure is lower than
0.05Mpa and should be checked
immediately.
Charging indicator (L)
This lamp indicates the battery condition of
charge. The lamp comes on when the ignition
switch is set at ―ON‖, but it goes out as the
engine starts and accelerator pedal is
pressed.
Caution
If the light continues to stay lit or lights up
during operation, the charging rate is low
and should be checked immediately.
Left turning indicator [M]
Right turning indicator [N]
When the truck turns left, the indicator is set
forward, the lamp lights up.
When the truck turns right, the indicator is set
backward, the lamp lights up.
Air filter indicator [O]
When the light is on, it indicates the air inlet
system is blocked, stop the truck and clean
the air filter.

Table of Contents

Related product manuals