23
5.3 Battery charging
That is, during truck operation the battery discharge process, the battery over-discharge is
prohibited. After the truck is running, it is timely to charge the battery.
WARNING
The truck comes with charger, the charger charging power supply must be
single-phase power frequency AC power.It’s prohibited to use DC, AC two
phase/three phase and other non single phase AC to charge the battery.
5.3.1 Power interface
– Input voltage: 85～265VAC
– Input frequency: 47～63Hz
– Input current: 1.5～3.5A
5.3.2 Battery charging steps
Procedure:
– Park the truck securely.
– Remove the charging plug(5) from fixator(36) , and
plug in proper power socket.
– Charge the battery until the green light of charging
indicator (4) continually lights up.
– Remove charging plug(5) from the power socket
and plug into the fixator(36).
CAUTION
When the battery capacity is lower than 40%,
please charge.
Truck travelling function is prohibited when
charging.
Do not suspend charging before fully
charged.
To Next Page