EasyManua.ls Logo

HANGCHA X Series - Operation and Safety Guidelines; Purpose and Permitted Use; Operational Conditions and User Responsibilities

HANGCHA X Series
126 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
1.Specified purpose
General
Truck in this manual is only for lifting and transporting loads.
It must be used, operated and maintained according to the information in this manual. Any other
uses are outside the design envelope and can lead to injury to persons or damage to equipment
and property.
Use as required
The usable range of forklift trucks:
Lift loads.
Transport loads in short distance.
It is forbidden to drive when the cargo is in the lifting state.
Do not carry people.
Do not push and pull loads.
The cargo must be fixed on the trailer when the trailer is towed.
Do not exceed the allowed trailer load.
Warning
·The maximum traction load is indicated on the model plate and must not exceed this value.
·The goods must rest on the back of the fork holder and in the middle of the fork.
Allowed conditions of use
Forklift use conditions:
The allowable temperature range is between -20 ° C and 50 ° C.
The allowable air humidity is no more than 90% (20 ° C).
The allowable wind speed is no more than 12m/s.
Use only on flat ground with sufficient carrying capacity.
Use only on roads with a good view and approved by the equipment user.
Max. uphill grade when driving without load is 25%.

Related product manuals