To Next PageTo Next PageWhat causes Low temperature water Probe failure in HANLI Chiller?
If your HANLI Chiller is showing a Low temperature water Probe failure, it could be due to a short circuit or disconnection in the low temperature water probe, so check for loose probe wires. Alternatively, the low temperature water probe might be damaged, requiring a replacement probe.
What does Water level switch alarm mean on HANLI Chiller?
If your HANLI Chiller displays a Water level switch alarm, it means the water tank level is insufficient. Refill the tank to the level standard zone.
Specifies ambient temperature, relative humidity, and altitude limits for operation.
Details acceptable cooling media, including additives, and prohibited substances.
Outlines environmental conditions, mounting, and clearance requirements for installation.
Guides on connecting the chiller's water pipes to the laser system.
Details electrical connection standards, power supply, and wiring.
Instructions for filling the chiller with cooling medium and removing air.
Checklist for verifying system readiness before initial operation.
Overview of different chiller controller interfaces and their functions.
Explains what is shown on the display when the unit powers up.
How to view and interpret temperature readings on the controller.
Guide to adjusting operational parameters and settings on the chiller controllers.
Instructions for cleaning dust from the condenser and filters during summer.
Procedures to prevent frost damage during cold weather and winter storage.
Routine maintenance tasks to ensure performance and prolong service life, performed weekly.
Guidelines for safely moving and handling the equipment during transport.
Recommendations for storing the equipment when not in use to protect it from damage.
Information on manufacturer support, warranty, and service.
Additional important notes regarding power supply and repair safety.
General