To Next PageTo Next PageWhat causes Low temperature water Probe failure in HANLI Chiller?
If your HANLI Chiller is showing a Low temperature water Probe failure, it could be due to a short circuit or disconnection in the low temperature water probe, so check for loose probe wires. Alternatively, the low temperature water probe might be damaged, requiring a replacement probe.
What does Water level switch alarm mean on HANLI Chiller?
If your HANLI Chiller displays a Water level switch alarm, it means the water tank level is insufficient. Refill the tank to the level standard zone.
Details safety measures, operational specifications, and risk warnings for safe use.
Specifies acceptable ambient temperature, humidity, and altitude for operation.
Details necessary environmental and space requirements for proper installation.
Provides guidance on connecting the chiller's water pipes and electrical circuits.
Instructions for filling the system with water and removing trapped air.
Checklist of essential inspections before commissioning the chiller.
Lists fault codes, analysis, and corresponding exclusion methods for diagnostics.
General