To Next PageTo Next PageWhat causes Low temperature water Probe failure in HANLI HL-20000 Chiller?
If your HANLI Chiller is showing a Low temperature water Probe failure, it could be due to a short circuit or disconnection in the low temperature water probe, so check for loose probe wires. Alternatively, the low temperature water probe might be damaged, requiring a replacement probe.
What does Water level switch alarm mean on HANLI HL-20000?
If your HANLI Chiller displays a Water level switch alarm, it means the water tank level is insufficient. Refill the tank to the level standard zone.
Specifies ambient temperature, relative humidity, and altitude requirements for optimal operation.
Details the required cooling medium, including acceptable additives and prohibited substances.
Outlines the necessary conditions and requirements for correctly installing the equipment.
Details the procedures and considerations for connecting the chiller's water circuits to the laser system.
Provides guidance on electrical connections, including wiring standards and power supply requirements.
Explains procedures for adding cooling medium and removing air or draining the system.
Explains how to protect the chiller from frost, including draining and antifreeze use.
Outlines the regular weekly maintenance tasks required to ensure optimal chiller performance.
General