To Next PageTo Next PageWhat causes Low temperature water Probe failure in HANLI HL-6000?
If your HANLI Chiller is showing a Low temperature water Probe failure, it could be due to a short circuit or disconnection in the low temperature water probe, so check for loose probe wires. Alternatively, the low temperature water probe might be damaged, requiring a replacement probe.
What does Water level switch alarm mean on HANLI HL-6000 Chiller?
If your HANLI Chiller displays a Water level switch alarm, it means the water tank level is insufficient. Refill the tank to the level standard zone.
Specifies ambient temperature, humidity, and altitude limits for operation.
Details required cooling medium types, allowed additives, and prohibited substances.
Covers unpacking, checking, leveling, anchoring, and clearance requirements.
Covers unpacking, checking, leveling, anchoring, and clearance requirements.
Procedure for connecting the chiller's water pipes to the laser system.
Guidelines for connecting the power supply and signal wires to the chiller.
Procedure for filling the system with water and removing air.
Check valves, connections, water level, power supply, earthing, and wiring.
Details draining water and using antifreeze based on ambient temperature for winter storage.
Table of fault codes, failure analysis, movement, and exclusion methods for split controllers.
General